Casella CEL Vortex Ultraflow area sampling pump - Manual (Page 3)

1. INTRODUCTION
This handbook is designed to introduce you to the basic operation and
features of the VORTEX Ultra Flow and VORTEX Ultra Flow lite sampling
pumps.
These pumps provide up to 20 litres/min and are intended primarily for
asbestos clearance monitoring, however, both units are also suited to many
applications including PM10/2.5.
The increased performance of the standard Ultra Flow can provide a flow rate
of 12 litres/min through a 0.8 µ filter.
The Ultra Flow lite, with a reduced specification and lower price, is ideally
suited to asbestos clearance monitoring at 8 litres/min.
The information contained in this handbook relates to the operation of Casella
sampling equipment only, and is not intended to advise or influence your
adopted sampling strategy. For information regarding appropriate sampling
methods, reference should be made to local legislation and guidelines as
dictated by the relevant national health and safety organisations.
CASELLA CEL are able to offer a wide range of training courses and
analytical services specifically suited to users of air sampling equipment.
Please contact CASELLA CEL for further information.
Introduction
Page 3 of 12
VORTEX Ultra Flow & Ultra Flow lite
SAMPLING PUMPS Handbook