Brennenstuhl Aluminium Trestles AMB 200 - Manual (Page 12)

12 GB
Introduction / Safety advice
q
Technical Data
Type: AMB200
Dimensions: 75 x 80 cm (B x H)
Weight: 5 kg
Max. Load: 200 kg
Safety advice
KEEp ALL THE SAFETy ADvICE AND INSTRUC-
TIONS IN A SAFE pLACE FOR FUTURE REFERENCE!
O
WARnInG! DAnGER OF
LOSS OF LIFE AnD ACCIDEnT
TO InFAnTS AnD CHILDREn!
Never leave children unsupervised with the
packaging materials. The packaging material
presents a suffocation risk. Children frequently
underestimate danger. Keep out of reach of
children. This work bench is not a toy.
O On delivery and prior to first use, inspect the
work bench in order to check the condition and
function of all parts. Do not use the product if it
has been damaged. You risk injury if you do
otherwise.
O Do not use a damaged workbench.
O CAuTIOn! Do not leave children
unattended. The product is not a climb-
ing frame or toy. Make sure that no-
body climbs or leans on the product, particularly
children. The product could become imbalanced
and tip up. This may result in injury and / or
damage.
O CAuTIOn! RISK OF InJuRY!
Never use the workbench as a ladder
or as anything else.
O CAuTIOn! RISK OF InJuRY!
Never climb on the workbench or
work surface.
O Make sure that you never exceed the
maximum permissible load of 200 kg.
Make sure that the workbench is stable
and cannot tip. Injuries or damage to
the product can result.
O CAuTIOn! CRuSHInG HAZARD!
Watch your fingers when opening
and closing the workbench.
O Only use the product on firm, level
surfaces. If used on unstable or uneven
surfaces– e.g. gravel surfaces– the
load can slip.
O CAuTIOn! RISK OF InJuRY!
Absolutely do not use the workbench
on subsurfaces that have slopes. The
workbench, along with any workpieces on it,
can tip over.
O Make sure that the standing legs 2
are completely unfolded and that the
nylon bands
3 are pulled tight when
you use the workbench. This is the only way to
insure stability.
O CAuTIOn! RISK OF InJuRY!
Make sure that the subsurface is not
damp or oily. The workbench can slip
and fall over.
O Make sure that the workpieces / work
surface cannot slip on the double
padding
1 . Secure them if needed.
O Make sure that you do not load
workpieces unevenly. Otherwise, the
workpiece can become unbalanced
and fall down.
O Remove any excess materials on the workbench,
e.g. wet paint, dirt, oil or snow.
Alu-Arbeitsbock_Content_EU.indd 12 14.06.10 09:40