Brennenstuhl Aluminium Trestles AMB 200 - Manual (Page 11)

11 GB
Introduction
Aluminium trestle AMB200
Q Introduction
Before using the product for the first time,
take time to familiarise yourself with the
product first. Read the following operating
instructions and safety instructions carefully. Please
keep these instructions in a safe place. If you hand
this product on to a third party, you must also pass
on all documents relating to the product. Only use
the product as described and for the designated
areas of application.
q
Intended use
This workbench is intended for use as a trestle table
for DIY enthusiasts and hobbyist. Do not climb on
the workbench or the work surface. Any use other
than previously mentioned or any product modifica-
tion is prohibited and can lead to injuries and / or
product damage. The manufacturer is not liable for
any damages caused by any use other than for the
intended purpose. The product is not intended for
commercial use.
q
Scope of Delivery
1 x trestle table
1 x operating instructions
q
Description of parts
1 double padding
2 standing leg
3 nylon band
The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Make sure that the workbench is stable and
cannot tip.
Observe caution and safety notes! Only use the product on firm, level surfaces.
Danger of loss of life and accident to infants
and children! Absolutely do not use the workbench on sub-
surfaces that have slopes.
Never use the workbench as a ladder or as
anything else.
Make sure that the standing legs are completely
unfolded and that the nylon bands are pulled
tight when you use the workbench.
Never climb on the workbench or work surface.
Make sure that the subsurface is not damp or
oily.
Make sure that you never exceed the maximum
permissible load of 200 kg.
Secure the working surface so that it cannot slip.
Do not load the workpiece unevenly, e.g. on one
side only.
Alu-Arbeitsbock_Content_EU.indd 11 14.06.10 09:40