Brennenstuhl PIR Motion Detector PIR 240 IP44 White - Manual (Page 12)

PIR 240 IP44 V2
12
Problem: Light stays on.
Possible Cause1:
Suggested Solution:
Constant Re-aiming the sensor can help
false alarms
Possible Cause2:
Suggested Solution:
Time set is too Shorten duration
long.
Problem: Light activates during the day.
Possible Cause:
Suggested Solution:
Set LUX-setting dial Set LUX-setting dial to the
for daylight desired light level again.
Problem: Range decreases for settings in daylight.
Possible Cause:
Suggested Solution:
Interference from Perform settings and tests at night
sun light
Important:
1. Clean the sensor lens off with a damp cloth every 3 months, so
that no dust accumulates and the correct function of the
motion detector is assured.
2. Do not perform any technical modifications on this product.
3. Infrared-motion detectors are more sensitive in cold, dry
weather than in warm, humid weather.
4. Do not turn the setting dial through more than 360°. Turn the
setting dial carefully until it stops and then back in the other
irection.
011809 Bewegungsmelder PIR 240_011809 BA_Bewegungsmelder PIR 240 10.07.15 14: