7 installation and operation, 1 installation – Brennenstuhl Illuminated House Number Solar Power SH 4000 User Manual
Page 18

Solar Powered SH 4000
Brennenstuhl
User's Handbook
Version: S-P_11_2006
18
7 Installation
and
operation
The basic functions of the house number light are explained in this section. Read it through carefully
so that you will understand and be able to make use of all the functions.
IMPORTANT: Observe the following instructions, especially those relating to safety, in order
to prevent operating errors and potential defects.
If you have any problems, refer to the List of faults (Section 11) or contact our Service Centre (for
contact details, see Section 12)
7.1 Installation
NOTE: It is advisable to install the light in a position where it is exposed to direct sunlight. The
duration of illumination depends on the intensity of the sunlight.
Step
Operation
Description
Unscrew and remove the screws (11) from the underside of the
light using a small Phillips-type screwdriver.
No.
Designation
Function
1
Open up the
house number
light
11
Screws
Fasten the cover to the rear panel
2 Mark
out
mounting
holes
Using the rear panel as a template, mark out the mounting holes
with a pencil.
TIP: Use a spirit level when marking out the mounting holes.
This will subsequently ensure that the light is mounted horizontally.
5
11
0415880 Solar_Hausnr_SH 4000-Dru18 18
0415880 Solar_Hausnr_SH 4000-Dru18 18
22.02.2007 15:41:31
22.02.2007 15:41:31