beautypg.com

Specifications, Disposal – Brennenstuhl Chip LED Light L CN 150 PIR IP44 with PIR sensor 50W 3500lm Energy efficiency class A User Manual

Page 8

background image

8

User Manual

L903 IP 55 / L903 PIR IP 55

TIME

Use the motion detector’s TIME control knob to set the On time

between approx. 5 seconds and 7 minutes after detecting the last

movement.

LUX

The light setting determines at which ambient brightness the light

system switches on.

Wait until the desired ambient brightness is reached.

• Turn the LUX control knob completely toward the

 icon.

• Now turn the control knob slowly towards the

 icon until the light

switches on motion-controlled.

• The light will now turn on at the set brightness.

Specifications

Technical data:

Mains power:

L903 IP 55:

220-240 V~ 50 Hz

L903 PIR IP 55:

220-240 V~ 50 Hz

Output:

L903 IP 55:

25,5 W

L903 PIR IP 55:

25,5 W

Standby:

approx. 0.6 W

Protection class:

IP 55

Operating temperature: –20°C - +50°C

External lighting:

Do not connect external lights

L903 PIR IP 55 only:

Motion detector:

Passive infrared sensor

Detection range/angle: Up to 10 m / up to 140° (horizontal)

Time setting:

5 sec to 7 min

Disposal

Do not dispose of electrical appliances with the household waste!

According to European directive 2002 / 96 / EG for waste

electric and electronic appliances and national implementation

waste electric appliances must be collected separately and must be

environmentally friendly recycled. Enquire at your municipally

collection points for waste electric and electronic appliances.

079612 BA_LED-Strahler L903 07.05.13 12:04 Seite 8