Setting up – Boogie Board Sync 9.7 eWriter User Manual
Page 9

9
BOOGIE BOARD SYNC 9.7 EWRITER USER MANUAL
SETTING UP
Charging
IMPORTANT:
Charge your Boogie Board Sync eWriter for four hours before first use. A full charge will last approximately
one week under normal use.
1. Remove the Boogie Board Sync eWriter and micro USB cable.
2. Connect the micro end of the USB cable to the micro USB
port on the bottom of your Boogie Board Sync eWriter.
3. Connect the USB A (larger) end of the micro USB cable into an
available USB port on a properly charged external device (tablet
or computer).
4. When the Boogie Board Sync eWriter is connected and charging,
you will see two lights:
• The charging indicator light next to the micro USB port on the
Boogie Board Sync eWriter will appear
RED
. This light will turn
OFF when the Sync is fully charged.
• The status indicator light next to the erase button on the front
of the Boogie Board Sync eWriter will appear
RED
. This indicates
that the Boogie Board Sync eWriter is not recording onto the
Boogie Board Sync eWriter’s internal memory.
5. Disconnect the micro USB cable from your external device and
Boogie Board Sync eWriter. Your Boogie Board Sync eWriter is now
ready to use.
It is suggested to charge your Boogie Board Sync eWriter when the
Status Indicator light appears yellow or red. See page 16 for an indicator
light chart.
Boogie Board
Sync eWriter
External
Device
Status Indicator
Charging Indicator