Dukane ImagePro 8783 - Manual (Page 7)

7
ENGLISH
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFY PAGE UP VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFY PAGE UP VOLUME
DOWN ࡯
ON
OFF
㧗
FREEZE
Displaying the picture
.
Make sure that the signal source is sending
the signal to the projector.
2.
Use the VOLUME +/- buttons to adjust the
volume. To have the projector silent, press
the MUTE button on the remote control.
3.
Press the INPUT/ENTER button on the
projector.
Each time you press the button, the projector
switches its input port in turn.
You can also use the remote control to select
an input signal. Press the VIDEO button for
selecting an input signal from the VIDEO or
S-VIDEO port, or the COMPUTER button for
selecting an input signal from the COMPUTER
IN1 or COMPUTER IN2 port.
4.
Press the ASPECT button on the remote control.
Each time you press the button, the projector
switches the mode for aspect ratio in turn.
5.
Use the zoom ring to adjust the screen size.
6.
Use the focus ring to focus the picture.
VIDEO button
COMPUTER button
STANDBY /ON button
AUTO button
VOLUME+/- buttons
MUTE button
ASPECT button
▲ cursor button
▼ cursor button
MENU
LAMP
TEMP
POWER
STANDBY/ON
INPUT/
ENTER
STANDBY/ON button
INPUT/ENTER button
POWER indicator
Lens cover
Zoom ring
Focus ring
Turning off the power
.
Press the STANDBY/ON button on the projector or the remote control.
The message "Power off?" will appear on the screen for about 5 seconds.
2.
Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the
POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete.
3.
Attach the lens cover, after the POWER indicator turns in steady orange.
Do not turn the projector on for about 10 minutes after turning it off. Turning the projector
on again too soon could shorten the lifetime of some consumable parts of the projector.
WARNING ►Do not touch around the lamp cover and the exhaust vents
during use or just after use, since it is too hot.
►Remove the power cord for complete separation. The power outlet should be
close to the projector and easily accessible.
NOTE • Please power off the projector, after any connected devices are powered off.
• This projector has the AUTO OFF function that can make the projector turn off
automatically. For more information, please see the “Operating Guide” in the CD.
NOTE • The ASPECT button does not work when no proper signal is inputted.