AVUE AVG19WBV-2D – 18.5” LED CCTV Security Monitor Built-in Speakers - Manual (Page 15)

Clock: If the clock setting is not exactly the same as the DVR or computer, you may observe
periodic vertical bars of video noise on your image. These noise bars are usually
adjusted out when an Auto Adjust is performed. If the noise bars are still present, this
setting can be adjusted manually.
13 …………………………………………………………………………… INSTRUCTION MANUAL
2. OSD setup under VGA input mode (continued)
C. AUDIO MENU
Press the MENU button to bring the menu on
screen, and then Up / Down buttons to move
left and right across the menu selections to
highlight the AUDIO menu. Press the Menu
(Source) button to enter the (highlighted)
AUDIO sub menu.
Each additional press of the Menu/Source
button moves the yellow highlighted sub-menu
selection downward, moving from the bottom
selection back to the top of the sub-menu.
Pressing the Up / Down buttons will adjust the
value of the highlighted item. Press the MENU
button to save the values. Press EXIT to exit
the sub-menu, and go back to the main menu
choices. Pressing the EXIT button while at the
top level will close the menu and return to
normal operations.
Adjustments
Volume:
Increase or decrease the volume.
4 :
3