Connection and installation, Resetting the unit – Atlona AT HD500 User Manual

Page 7

Text mode
Original mode

Connection and Installation

To reset the HD500 use the following steps:

1. Press and hold the menu button for five seconds
2. While still holding the menu button, unplug the HD500
3. After 5 seconds of holding the menu button while the HD500 is unplugged, plug the HD500
back in.
4. Hold the Menu button for 5 more seconds as the HD500 comes on
5. Release the menu button and the reset is complete

Note: Re-establishing the connection between the source, HD500, and display may take up to a

minute after the reset is complete

Resetting the unit

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

VGA and Audio source

HDTV

Integrated Amplifier

AT-PA100-G2 (optional amp)
Purchase at atlona.com