Atlona AT VGA300CV - Manual (Page 4)

1. Front Panel
1. PC/HD BYPASS: BYPASS THE PC/HD INPUT SIGNAL.
2. INPUT: CONNECT THE PC INPUT D-SUB (15-PIN) PORT TO THE D-SUB OUTPUT PORT OF YOUR SOURCE
EQUIPMENT SUCH LIKE PC.
2. Rear Panel
1. POWER: PLUG THE 5VDC POWER SUPPLY INTO THE UNIT AND CONNECT THE ADAPTOR TO AC WALL
OUTLET.
2. PC/HD OUTPUT: CONNECT THE PC OUTPUT D-SUB (15-PIN) PORT TO THE D-SUB INPUT PORT OF YOUR
DISPLAY.
3. MENU BUTTON: PRESS THE MENU BUTTON TO BRING UP OSD OPERATION MENU.
(SEE SECTION “4. OSD OPERATION” FOR REFERENCE.)
4. +/- BUTTON:
a. THE MINUS (–) BUTTON WILL AUTO ADJUST THE PICTURE.
b. ON THE FIRST TIER OF OSD MENU, USE + AND – BUTTONS TO MOVE UP/DOWN THE HIGHLIGHT ITEM
FOR SELECTION.
c. ONCE THE DESIRED OPTION IS SELECTED, USE + AND – BUTTONS TO TOGGLE BETWEEN SETTING VAL-
UES.
PANEL DESCRIPTION
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
3