Atlona AT HDWP Extenders - Manual (Page 4)

4
Electrical Box
Compatible electrical boxes (see below)
Type: Plastic old-work electrical box or mud ring
Size: 2 Gang
Dimensions: Inner opening must be greater than 3.58” wide and 2.68” high
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
LINK
FW
HDMI OUT
AT-HDWP-IR
PWR
IR IN
IR
IR OUT
- +
Panel Description
1. HDMI OUT Port: Connect to HDMI display.
2. IR IN Port: Connect the IR receiver to this port.*
3. IR OUT Port: Connect the IR Emitter to this port.*
4. Yellow Link LED: Signal Indicator for the CAT5e/6/7 OUT port. LED will remain solid, unless there
is an issue with the cable or signal, then it will blink.
Green Power LED: Power indicator. If plugged in light will remain solid. If LED starts blinking
power is intermittent or there is a problem with the cable. If LED is off, no power is passing to
the receiver (check your outlet or the power cable).
5. Firmware Update Port: Use a Mini USB to USB A cable to connect to a Windows computer for
updating.
6. CAT5e/6/7 IN Port: Connect a category cable from a compatible transmitter to this port.
1
4
2
5 6
3
*For IR products only