Atlona AT HDWP RSNET UK - Manual (Page 5)

5
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
UK Wall Plate Installation
There are four pieces that will need to be interconnected in order for the AT-HDWP-RSNET-UK to
be installed in the wall. The electrical box (picture A), the wall plate back box (picture B), the face
plate (picture C) and the CAT cable.
The first step in installation is to remove the face plate from the wall plate. To do this, remove the
four included 4mm screws on the sides (as pictured above).
Note: Avoid contact with the PCB board in the wall plate back box, electrostatic discharge (ESD)
may damage sensitive chips.
The second step is to route the CAT cable through the electrical box (as seen above) and connect it
to the back of the wall plate back box (see picture on top of page 6).
A
B C