Atlona AT HDWP RSNET User Manual
Page 5
5
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Wall Plate Installation
There are four pieces that will need to be interconnected in order for the AT-HDWP-RSNET to be
installed in the wall. The electrical box (picture A), the Decora HDBaseT module (picture B), the
Decora face plate (picture C) and the CAT cable.
The first step in installation is to connect the cat cable to the Decora HDBaseT module and install it
into the electrical box (as seen above).
Note: Use the four 5/16” Phillips head screws to install into the electrical box, these screws will be
unpainted.
A
B
C