beautypg.com

Troubleshooting rj45 pin configuration – Atlona AT COMP10SS User Manual

Page 5

background image

4

www.atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

TROUBLESHOOTING

RJ45 PIN CONFIGURATION

1. Orange-white

Video Pb -

2. Orange

Video Pb +

3. Green-white

Video Y -

4. Blue

Audio +

5. Blue-white

Audio -

6. Green

Video Y +

7. Brown-white

Video Pr -

8. Brown

Video Pr +

1. No Signal or it is going in and out:
a. Please test your RJ45 cables with a Fluke or similar tester to make sure that all the wires are connected
and the distance is within the limits.
b. If you are using patch panel or and RJ45 wall plates, the distance will be reduced, please do a direct con-
nection bypassing all additional equipment.
c. Please try to re-terminate your CAT5/6/7 wire to 568B
d. Try using STP Cable
2. Image is tilted:
a. Try using STP Cable
3. No Video Signal on the Display or Signal is going in and Out:
a. Please test your RJ45 cables with a Fluke or similar tester to make sure that all the wires are connected
and the distance is within the limits.
b. If you are using patch panel or and RJ45 wall plates, the distance will be reduced, please do a direct con-
nection bypassing all additional equipment.
c. Please try to re-terminate your CAT5/6/7 wire to 568B
4. Ghosting effect
a. Some lower end CAT5/6 cables may have a different twist for internal cables which will result different sig-
nals arrive at the destination at different time and therefore cause Ghosting effect. The ghosting effect is ba-
sically letters doubling up or incorrect colors. We include 2 x Skew adapters in the package, it is recommended
to use them.

Total Distance

Transmitter

Skew

adapter

Skew

adapter

Receiver

Short cable

to the

receiver

1/2 Distance

1/2 Distance