Atlona AT COMP10SS - Manual (Page 4)

3 www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Inputs 1 x Component Video, 1 x Stereo Audio, 1 x Optical, 1 x S/PDIF
Outputs 10 x RJ45, 1 x Component Video, 1 x Stereo Audio, 1 x Optical, 1 x S/PDIF
Supported Resolutions all up to 1080p
Video bandwidth 550MHz(-3dB)-loop out and 370Mhz Cat5/6
Distance 1080p @1000ft; 1080i/720p @ 1250ft; 480p @1400ft
Power Consumption (max.) 1.5A
Component Connector 3 x RCA female
Stereo Audio Connector 2 x RCA
S/PDIF Connector 1 x RCA
Optical Connector Toslink
Power Supply 5V/2A (110/240 universal)
Dimensions (inch) 18.97×6.96×1.73 (Lx W x H) (1U)
Weight 4.1
Operating Temperature Range -5 to +35°C (-41 to +95 °F)
Operating Humidity Range
5 to 90 % RH (no condensation)
SPECIFICATIONS
CONNECTION AND OPERATION
1. Connect the Component Source e.g., Cable/Sat receiver, DVD player, Video Codec, switch to the
AT-COMP10SS (transmitting unit)
2. Connect the Component Display e.g., Projector, LCD/LED or a switch to (receiving unit (AT-COMP300RL))
– (receiving unit is sold separately)
3. Terminate the CAT5, 6 or 7 wire with 568B termination and use a tester to make sure all pins are wired
correctly before connect it to the VGA10SS transmitter.
4. Connect the power supplies to both transmitter and receiver and the video and in a few seconds the video
should appear on the display.