beautypg.com

Turning on the power, Connecting power supply – Dukane Projector 8112 User Manual

Page 7

background image

7

ENGLISH

Turning on the power

1.

Make sure that the power cord is firmly
and correctly connected to the projector

and the outlet.

2.

Make sure that the POWER indicator is
steady orange. Then remove the lens

cover.

3.

Press the STANDBY/ON button on the
projector or the remote control.

The projection lamp will light up and the
POWER indicator will begin blinking in
green. When the power is completely on, the
indicator will stop blinking and light in steady
green.

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT

SEARCH

BLANK

MUTE

MY BUTTON

POSITION

1

2

ESC

ENTER

MENU

RESET

COMPUTER

MY SOURCE/

AUTO

MAGNIFY

PAGE

UP

VOLUME

DOWN

ON

OFF

FREEZE

POWER

TEMP

LAMP

MENU

INPUT

STANDBY/ON

Connecting power supply

1.

Put the connector of the power cord into the
AC IN (AC inlet) of the projector.

2.

Firmly plug the power cord’s plug into the
outlet. In a couple of seconds after the

power supply connection, the POWER indicator
will light up in steady orange.

Please remember that when the DIRECT POWER ON
function activated, the connection of the power supply
make the projector turn on.

WARNING ►Please use extra caution when connecting the power cord, as

incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
• Never modify the power cord.

WARNING ►A strong light is emitted when the projector’s power is on. Do

not look into the lens of the projector or look inside of the projector through any
of the projector’s openings.

NOTE • Please power on the projector prior to the connected devices.

• The projector has the DIRECT POWER ON function, which can make the
projector automatically turn on. For more information, please see the “Operating
Guide”.

(

16)

AC IN

Power cord

STANDBY/ON button
POWER indicator