Annual maintenance – Ducane Affinity 31-3200 User Manual

Page 27

Battery Replacement of Burner Igniter

Unscrew the push button igniter and remove the old battery and replace with a new
one. Requires 1 “AAA” alkaline battery. The shrink wrap must be removed from the
battery before installation.

Replacing the Main Burners

1. Your Ducane

gas barbecue must be “OFF” and cool.

2. Turn “OFF” gas at source.
3. Remove the cooking grate and the heat distribution plates, exposing the burner

tubes.

4. Remove front panel knobs, bezels and igniter Module for electronic ignition for the

burners.

5. Then remove the front panel.
See: Inspection of the Spider/Insect Screens for removal of the burner tube.
To reassemble, reverse steps 3 through 5 above.

ƽ CAUTION: The burner openings (1) must be positioned

properly over the valve orifices (2). Check proper assembly
before fastening manifold/front panel in place.

ƽ WARNING: After reinstalling the gas lines, they should be

leak checked with a soap and water solution before using
the barbecue.

ANNUAL MAINTENANCE