Atlona AT HDMI 40SRS - Manual (Page 8)

7
Note for EDID (Extended Display Identification Data) learning
1. Please connect the display which you want to read EDID with a HDMI
cable to the transmitter’s HDMI-IN and turn Mode to 7 so the Transmitter
can learn the EDID information from the connected HDTV. The LED on the
RJ45-OUT of Transmitter will dim and light again in a few seconds, which
indicates the EDID learning process is completed.
2. Turn
Mode clockwise from Mode 7 to Mode 0 or Mode 1 for desirable
audio setting and enjoy the experience. DO NOT let the rotary arrow pass
by Mode 6 which will erase the EDID just learned and restore the default
EDID.
After the EDID is learned, please turn MODE to 1, then begin to adjust EQ
on Receiver from 7 to 0.