Atlona AT LINE PRO5 GEN2 V3 - Manual (Page 6)

6
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
On Screen Display Menu
1st Tier Option 2nd Tier Option Adjustment
Video PICTURE MODE USER / STANDARD / VIVID / MOVIE
CONTRAST 0 ~ 100 of Contrast Level
BRIGHTNESS 0 ~ 100 of Brightness Level
HUE 0 ~ 100 of Hue Level
SATURATION 0 ~ 100 of Saturation Level
SHARPNESS 0 ~ 100 of Sharpness Level
SCALE OVERSCAN / UNDERSCAN / LETTERBOX/ PANSCAN
/ FULL
NR LOW / MIDDLE / HIGH / OFF
EXIT Back to the 1st Tier
COLOR COLOR TONE USER / NORMAL / WARM / COOL
RED 0 ~ 100 of Red Color Level
GREEN 0 ~ 100 of Green Color Level
BLUE 0 ~ 100 of Blue Color Level
EXIT Back to the 1st Tier
OUTPUT VGA (640x480) 480i 576i WXGA (1280x800)
SVGA (800x600) 480p 576p WSXGA (1680x1050
XGA (1024x768) 720p@60Hz 720p@50Hz WUXGA (1920x1200)
UXGA (1600x1200) 1080i@60Hz 1080i@50Hz WUXGA+ (1440x900)
SXGA+ (1400x1050) 1080p@60Hz 1080p@50Hz 1080p@30Hz
OSD HPOSITION 0 ~ 100 of OSD Horizontal Position
VPOSITION 0 ~ 100 of OSD Vertical Position
TIMER 0 ~ 100 of OSD Show Time (sec.)
BACKGROUND (transparency) 0 ~ 100 of OSD Transparency Level
COLOR BAR On: Color bar will display when the source is
disconnected
Off: After the source is disconnected, a black
screen will be active for 50 seconds before the
output signal is shut off
Timeon 15min: Once the source is discontinued,
a color bar will be active for 15 minutes before the
output signal is shut off
EXIT Back to the 1st Tier
AUDIO SOURCE HDMI / L/R / COAXIAL
DELAY OFF / 40MS / 110MS / 150 MS
SOUND ON / MUTE
EXIT Back to the 1st Tier
INFORMATION SOURCE (Input interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
EXIT - Close the OSD Menu