Atlona AT LINE PRO5 GEN2 V3 - Manual (Page 4)

4
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
TMDS Clock Frequency 225Mbps
Input Ports 4 x HDMI
7 x 3.5mm stereo audio
2 x VGA
2 x Component Video
2 x Composite Video
1 x DVI
Output Ports 2 x HDMI
2 x 3.5mm stereo audio
Resolution outputs Video: up to 1080p @ 60Hz
Vesa: up to 1920x1200 Reduced Blanking
Dimensions (WxDxH) 17.16x6.57x1.92 (inch) or 436x67x49 (mm)
Weight 4.6lbs or 2.1kg
Temperature Operating: 32°F to 104°F or 0°C to 40°C
Storage: -4°F to 140°F or -20°C to 60°C
Power consumption 8.5W
Panel Description
Specifications
Front Panel
1. Power button: Press to Turn ON or set the device to standby mode. The LED will illuminate red
when the power is ON.
2. IR Receiver: This IR window receives IR signal from the supplied IR remote control.
3. CV 1 & 2: Press CV1 or CV2 to select composite video inputs 1 or 2, the LED will illuminate red.
4. COMP 1 & 2: Press COMP1 or COMP2 to select component inputs 1 or 2, the LED will illuminate
red.
5. VGA 1 & 2: Press VGA1 or VGA2 to select input 1 or 2, the LED will illuminate red.
6. DVI 1: Press this button to select DVI input, the LED will illuminate red.
7. HDMI 1 through 4: Press the HDMI number to choose input 1, 2, 3 or 4, the LED will illuminate red
8. MENU: Press this button to bring up the On Screen Display.
9. -/+: Press -/+ buttons to make a selection.
10. ENTER: Press this button to confirm the selection.
5 3 4 6 7 8 9 10 1 2