Atlona AT UHD EX 100CE - Manual (Page 5)

5
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Panel Description
TX
1. Ethernet - Connect to a router to send Ethernet signals
2. Firmware - Use a Mini-B USB to USB A cable to connect to a Windows computers for updating
3. Yellow Link LED: Signal indicator for the HDBaseT OUT port
Solid - Good signal from the CAT port
Blinking - Category cable is disconnected or not receiving signals
No Light - No signal is being received from the CAT port
Green Power LED: Power indicator
Solid - Plugged in and receiving power
Blinking - Power is intermittent or there is a problem with the cable
No Light - No power is passing from the wall outlet to the transmitter (check the cable or outlet)
4. DC 48V - Connect included captive screw power adapter here
5. RS-232 - Bidirectional RS-232, send signal to or from a control system, PC, source, or display
6. IR - Connect IR emitter
(included) or 3rd party control box to this port
7. HDBaseT OUT - Connect a category cable from here to an AT-UHD-EX-100CE-RX (included in KIT)
8. HDMI IN - Connect HDMI or DVI (with adapter) source here
Ex. Blu-ray player, cable box, HDDA series, H2H series, etc
RS-232
RX TX
IR IN
S
IR OUT
S
HDBaseT OUT
ETHERNET
HDMI IN
FW
DC 48V
LINK
POWER
AT-UHD-EX-100CE-TX
- +
1 2
3
8 7 6 5 4