SoundMax SM-CDM1055 User Manual
Page 5
5
ation/Connection
e the mounting location where the unit will not interfere with the normal driving func
iver.
Before finally installing the unit, connect the wiring and make sure that the unit works properly.
Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the
vehicle.
Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
If installation angle exceeds 30° from horizontal, the unit may not perform properly.
Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or
from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.
Installation
Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no
obstacles (wires, dashboard elements, etc) for the unit installation.
After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the
sleeve in place.
Notes: Use only the supplied mounting hardware for a safe and secure installation. Be sure to remove the
front panel before installing the unit. Keep the release key in a safe place as you may need it in the future to
remove the unit from the car.