Dual XDMR6850 - Manual (Page 8)

8
Press rotary encoder momentarily to select between
Volume (default), Bass, Treble, Balance, & Fader.
Press rotary encoder until BAS appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press rotary encoder until TRE appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press rotary encoder until BAL appears then rotate encoder
left/right to adjust (BAL L 1-BAL 00-BAL R 1).
BAL 00 represents equal balance
Press rotary encoder until FAD appears then rotate encoder
left/right to adjust (FAD F 1-FAD 00-FAD R 1).
FAD 00 represents equal fader
Individual Bass and Treble settings are retained in memory
for AM, FM, CD, XM, and AUX modes. This allows you to
save the Bass and Treble settings separately for each mode.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Press RESET upon initial installation or if abnormal
operation occurs. The reset button is located behind the
faceplate.
This feature is available when used with the EAUSB0
Media Link Adapter (sold separately).
This feature is available when used with the EAUSB0
Media Link Adapter (sold separately).
This feature is available when used with the EAUSB0
Media Link Adapter (sold separately).
Audio
Bass
Treble
Balance
Fader
Source Audio Memory
Reset
Record
Menu
Return
XDMR6850 OPERATION
General Operation
BASS VOLUME TREBLE BALANCE FADER