American Weigh Scales (AWS) CP3-650 - Manual (Page 3)

I. OPERATION
Place Scale on a horizontal flat surface.
1. Press [ ON/OFF ] key.
2. Wait until "0.0” or "0.00" is displayed.
3. Place the object(s) on the weighing platform.
4. By pressing the [ UNITS ] key, you can switch
between weighing units.
5. By pressing the [ LIGHT ] key, you can switch the
back-light on or off.
6. The removable lid can also be used as a weighing
tray.
II. TARE WEIGHING
1. Turn on scale as described above.
2. Place a tray or container on the scale platform.
3. Press [ TARE ] and wait until "0.0" or "0.00" is
displayed.
4. You can now add items to the container or tray to
obtain just the weight of the contents.
III. PARTS COUNTING
All object must be of equal weight for counting to work.
1. Turn on scale as described above.
2. Place a sample quantity (25, 50, 75, or 100pcs) of
the material you want to count on the platform
3. Press and hold the [ PCS ] key for 2 seconds until a
number is displayed (ie. 100pcs).
4. Press [ UNITS ] to change the sample quantity to
match the number you have on the platform.
5. Press the [ PCS ] key again to confirm the number.