American Weigh Scales (AWS) LS-110 - Manual (Page 4)

LS-110 Manual
IV. Operation
1. Set the ON/OFF Lock switch to the ON position and
then tap the key to turn the scale on.
2. Once the start-up process completes and the scale
goes to zero, you are ready to weigh.
3. Place the quantity to be weighed on the weighing
hook.
4. Once the weight has stabilized, a red light will
illuminate on the top of the scale and the LCD will
display HOLD above the weight.
5. The weight will remain on the display after the item
is removed from the hook. To re-zero the scale, tap
the key.
6. Once weighing is complete, hold the key to turn
the scale off then set the ON/OFF Lock switch to the
OFF position.
V. Changing the Unit of Measure
This scale can read in KG or LB. To change the weighing
mode, follow these instructions:
1. Tap the key to turn the scale on, then
immediatedly press the key again and hold it for
2-3 seconds until the weighing unit is displayed,
then release.
2. Now tap the key to change the weighing unit
between KG or LB.
3. After a couple of seconds the scale will enter normal
weighing mode.
• LS-110 Units: kg (kilogram) lb (pound)
VI. Using the Tare Feature
You can use this scale’s tare feature to subtract the weight