American Weigh Scales (AWS) SR-1KG User Manual
Page 3
I. SCALE OPERATION
Hold the scale steady when weighing.
1. Press the [ ] key.
2. If you would like to change the weighing unit,
continue to tap the [ ] key while the display starts up
(while 8888 is still displayed). Skip this step otherwise.
2. Wait until “0.00” or “0” is displayed.
3. Place the object(s) on the weighing hook.
4. When the weight is stable, the red light will turn on,
and HOLD will be displayed below the weight.
5. Remove the object(s) from the hook and tap the
[ ] key to re-zero the scale.
6. To turn the scale off, press and hold the [ ] key.
II. TARE WEIGHING
1. Turn on the scale as described above.
2. Place a container on the scale hook and wait for it
to stabilize (HOLD will be displayed).
3. Tap the [ ] button. “0.00” or “0” will be displayed.
4. You can now add items to the container or tray to
obtain just the weight of the contents.
5. When the container is removed, a negative number
will be displayed. Press [ ] again to zero the scale.
III. CALIBRATION
This scale has come pre-calibrated at the factory. Only
re-calibrate if you are experiencing trouble weighing.
SR-1 uses a 1000g calibration weight
SR-5 uses a 1000g calibration weight
SR-20 uses a 5000g calibration weight
1. Turn the scale OFF.