American Weigh Scales (AWS) BioWeigh-IR - Manual (Page 5)

5
value. Now press to accept.
The hour will begin to flash. Press
• and to adjust the
value. Now press to accept.
The minute will begin to flash. Press
• and to adjust
the value. Now press to accept. The display will
return to clock / temp. mode after 4 seconds.
VI. Basic Weighing
Press • or on the remote display to enter User Select
Mode. The sex, height, and age for the current user will
be displayed.
Select the relevant user using
• and .
The display will show the current weight applied to the •
scale.
VII. Changing Weighing Units
To change the current weighing unit, use the “UNIT” button
on the back of the remote display during weighing mode.
The display can change between kg -> lb -> st.
VIII. Entering Personal Data
Before you can obtain a body fat analysis, you must first
enter your user data including sex, height, and age:
Press • or on the remote display to enter User Select
Mode.
Select the relevant user using
• and . The sex, height,
and age for the current user will be displayed.
Press
• to edit sex. Use and change the value.