beautypg.com

American Weigh Scales (AWS) BioWeigh-IR User Manual

Page 4

background image

4

III. Battery Installation

This scale should come with batteries in the box. To

install the batteries, turn the scale over and remove the

battery cover. Insert two (2) AAA batteries according to

the diagram inside the battery compartment. Replace the

battery cover. Also insert two (2) AAA batteries into the

back of the remote display according to the diagram.

IV. Turning the Scale On and Off

This scale has an Auto-On and Auto-Off feature. The scale

will automatically turn on when the user steps on the

platform and automatically turn off after the user steps

off the platform. This scale is ready to weigh, and does not

require tapping first before stepping on the scale.

V. Clock & Temperature Mode

The remote display defaults to clock / temp. mode after 18

seconds of non-use. To set the clock:

In clock / temp. mode, hold the

(Set) button. The

current year will begin to flash. Press and to adjust

the value. Now press to accept.
The month will begin to flash. Press

and to adjust

the value. Now press to accept.
The day will begin to flash. Press

and to adjust the