American Weigh Scales (AWS) SM-500 User Manual
Page 6
SCALEMATE
required weight on the center of the platform. If you
wish to change the weight to 100g, press the TARE
key before placing the weight on the scale.
4. Once the weight is confirmed, the “g” will stop
flashing on the display and calibration is complete.
IX. Troubleshooting
•
Problem: Scale will not turn on
•
Solution: Check the batteries
•
Problem: Displayed weight fluctuates randomly
•
Solution: Make sure your workspace is stable and
free of any air currents or vibration
•
Problem: Displayed weight is inaccurate
•
Solution: Perform a calibration adjustment
X. Error Codes
1. OUTZ - Zero range has shifted. Perform calibration
adjustment. If the problem persists, the load cell may
be permanently damaged due to overloading.
2. 88888 - Maximum capacity exceeded. Remove the
extra weight to avoid damaging the load cell.
3. L - Batteries are low. Replace the batteries.