American Weigh Scales (AWS) BT2-1KG User Manual
Page 6
BT2-Series
you would prefer to use a 100g weight instead of the
default weight, you can press and hold the
T key to
change the calibration weight value before placing
the weight on the platform.
IX. Troubleshooting
•
Problem: Scale will not turn on
•
Solution: Check the batteries
•
Problem: Displayed weight fluctuates randomly
•
Solution: Make sure your workspace is stable and
free of any air currents or vibration
•
Problem: Displayed weight is inaccurate
•
Solution: Perform a calibration adjustment
X. Error Codes
1. OUTZ - Zero range has shifted. Perform calibration
adjustment. If the problem persists, the load cell may
be permanently damaged due to overloading.
2. 88888 - Maximum capacity exceeded. Remove the
extra weight to avoid damaging the load cell.
3. L - Batteries are low. Replace the batteries.