American Weigh Scales (AWS) AL-311 - Manual (Page 12)

12
AL-Series Manual
4. CONFIGURATION
4.1. Entering Configuration Codes
1. With the display off, press and hold the MODE key and tap the ON/OFF key to turn the balance on.
2. Release the MODE key once “EC2” is displayed.
3. The display will now prompt you to enter a 3 digit
configuration code. Codes can be found in table 4.2
below. To enter the code, press TARE/ZERO when the
desired value comes up for the first variable (x) (The
number will continue to count from 0~9 until TARE/
ZERO is pressed). Do the same for the next variables (y)
and (z). To go back a number, press the CAL button or
select 0 as an option. Once all three numbers have been
entered, the setting is confirmed.
4. To exit configuration, choose 0 as the first variable (x).
4.2. Configuration Codes
*Defaults are in grey
Setting X Y Z Options
Filter Intensity
(affects weight update
speed)
1 1 1 Fastest (use in highly stable conditions)
1 1 2 Faster
1 1 3 Fast
1 1 4 Slow (use for unstable conditions)
Ambient Conditions
Stability Range
(AL-201S: d=0.1mg)
(AL-311: d=1mg)
1 2 1 0.25d
1 2 2 0.5d
1 2 3 1d
1 2 4 2d
1 2 5 4d
1 2 6 8d
1 2 7 16d
1 2 8 32d
1 2 9 64d
x y z
Indicates
that the code
is the current
setting