Alto Professional M5A - Manual (Page 11)

9
6. WALL MOUNTING
To install M Monitor on the wall or ceiling,
Alto has provided an optional custom-built
bracket: The YS 60
Installation steps:
1. Mount the base (4) on the wall.
2. Adjust the angle of the bracket according to your needs.
3. Push the Solid Slide (12) into the specific Slot of the monitor speakers.
The M monitors provide 3 slots for each unit, respectively on top, side and bottom.
4. Use two screws (11, M3 10) to stop the Solid Slide at the proper position in the
slot.
5. Insert the Connecting Lever (10) of the accessory into its Fixing Lever (8), then
use another screw (9, M6 1.0PH 10) to fasten them.
Caution: While mounting the monitor speaker on the wall, please ensure the wall
is strong enough to support it. Consult the installation specialist or the dealer
for further instruction.