Alto Professional PAM5A - Manual (Page 4)

3
1. PAM5 Passive Live Monitor
1.1 Quick Start - Passive Speaker Cabinet
Make all initial connections, with the power switches Off for all equipment and main volumes are closed.
Connect one side of the speaker cable to the (SPK+1/-1) or Binding Post of your stereo power Output CHA-CHB
amplifier and the other side to the (Jack for Live applications) or (for fixed installations). Input Link Push-Button
Caution: The Nominal Impedance is 16 ohm and the Minimum Impedance is 12 ohm.
Put more attention to the impedance value, when you connect more speakers with the same power amplifier.
(1)
+ -
INPUT
R
LTO
PAM5
SOUND REINFORCEMENT
SPEAKER SYSTEM
POWER HANDLING
IMPEDANCE
AES 100 Watts
PEAK 200 Watts
16 ohms nominal
DESIGNED AND DEVELOPMENT IN ITALY
LINK
INPUT
SERIAL
MODEL
1.2 Input / Link Connections
(2)
Two types of linked connector are used, for Live application and for fixed instal- Mono Jack (1) Push-Button (2)
lation.
The Positive connection is usually marked with ( + ), or Red for push-button.
In case of 1/4" Standard Jack, the Tip of the plug is positive connection.
The Negative connection is usually marked with ( - ), or Black for push-button.
The sleeve of 1/4" Standard Jack will be the negative connection.