Alto Professional Live Drive App User Manual
Page 11
11
distorted, (A) reduce the fader's level in the app,
(B) reduce the loudspeaker's or subwoofer's
volume control setting (on its rear panel), or (C)
reduce the output level from your mixer.
The Fault indicator will light up
when the loudspeaker's or
subwoofer's amplifier has stopped working. If
this happens, power-cycle the loudspeaker or
subwoofer (power it off then on again), and
ensure its AC line voltage is within the range of
90–264 VAC. If this indicator still lights up,
please contact Alto Professional support at
.
Tap a Mute button to mute or
unmute the loudspeaker or
subwoofer.
Tap the icon of a loudspeaker or
subwoofer to access its four
subpages: DSP, EQ, Advanced, or
Setup.
Tap the gear icon to access the Global
Setup Page (described in the next
section).