Alto Professional TS112A - Manual (Page 8)

SPECIFICATIONS
Output Power:
400 W Continuous RMS (335 W LF Class D + 65 W HF Class AB)
800 W Peak (670 W LF Class D + 130 W HF Class AB)
Crossover: 2 kHz
Max SPL @ 1m: 122 dB Continuous, 125 dB Peak
Frequency Response: 52 Hz – 18 kHz (@ -10 dB)
Input Level: Line 0 dBu
Low Frequency: 12" (305 mm) woofer, 2" (51 mm) voice coil
High Frequency: 1" (25 mm) neodymium driver
Horn Coverage: 80/100° H x 60° V nominal
Connectors: Input: 1/4" TRS or XLR
Link: XLR
Cabinet: Polypropylene, trapezoidal
External Control: Volume, power on/off with LED, clip limiter with LED, ground lift
Power supply: 100-120 V or 200-240 V, 50/60 Hz
Dimensions (H x W x D): 26" x 15.6" x 15.1" (660 mm x 396 mm x 384 mm)
Weight (speaker only): 42.8 lbs (19.4 kg)
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
Inrush current at initial switch-on: 6.02 A
Inrush current after power supply interruption: 4.16 A
www.altoprofessional.com
MANUAL VERSION 1.4