ABUS Technologies PT-FD Series Pressure Transmitter - Manual (Page 9)

ABUS TECHNOLOGIES INC.
9
PT-FD
9. SAFETY PRECAUTIONS
1. The unit should be powered for 15 minutes before use.
2. Use in ambient temperature of 0-60˚C.
3. Avoid vibrations, shock, excessive dust, corrosive chemical materials or gaseous
environment.
4. Input wire should not be too long. If measured signal have to be far away from the unit,
please use 2-core shielded cable.
5. Use this instrument in the scope of its specifications, otherwise fire or malfunctions may
result.
6. Contact of the instrument, with organic solvents or oils should be avoided.
7. Do not turn on the power supply until all of the wiring is completed. Otherwise electrical
shock, fire or malfunction may result.
8. Do not disassemble, repair or modify the instrument.
9. All connections should be tightened properly.
10. Power supply should be constant, should not be fluctuating.
10. WARRANTY
ABUS provides the original purchaser of this instrument a one (1) year warranty against
defects in material and workmanship under the following terms:
•
The one year warranty begins on the day of shipment as stated on the sales bill.
•
During the warranty period all costs of material and labor will be free of charge provided
that the instrument does not show any evidence of misuse.
•
For maintenance, return the instrument with a copy of the sales bill to our factory.
•
All transportation and insurance costs should be covered by the owner of the equipment.
•
Should any sign of electrical or mechanical shock, abuse, bad handling or misuse be
evident the warranty voids and maintenance costs will be charged.
REV 01
•
Added Process Connection Data in Page 6
•
Changed Front Page Picture
ABUS TECHNOLOGIES INC.
www.abustek.com, E-Mail: [email protected]