ABtUS AMP-S040/AP1 - Manual (Page 2)

User Operation Guide
PRODUCT HIGHLIGHTS
PRODUCT DESCRIPTION
The ABtUS AMP-S040/AP1 is a new Eco Amplifier System that design to delivers quality stereo
audio amplification. With it’s compact size and output power of 2 x 40 watts. This amplifier
provide a new generation of energy savings. Digital Amplifier system that offer a powerful and
versatile answer to any installation’s needs especially with a short throw projection system or
in a multi media class room.
With it’s unique “Auto Power ON/Off base on with input detection” and digital amplification
circuit, it consume as low as 4.5 watts in a typical usage, which make this the most Eco-friendly
amplification solution ever. External volume and RS-232 control is integrated so that Volume
could be controlled by a external volume control or and third party central control system.
· Powered with switching power adaptor for maximum power efficiency
· Integrated with Class-D digital amplifier with low power consumption
· Integrated with input signal sensing for auto power ON/Off
· Fully Eco Friendly Digital Mixer Amplifier system (*energy saving)
· Integrated with external Volume and RS-232 Control connectivity
· Build in with 12V 1A output power for powering of any external devices (e.g. Media Control Switcher)
**Specification are subjected to changes without notice. . . for detail and updated information please visit www.abtussinagpore.com
1.1 FRONT PANEL VIEW
Item Description
AMP-S040/AP1
LED Indicator
1. PWR 1. Power indicator
Lighted when power ON, blinking when No Input or signal too low
2. Eco 2. Eco indicator
Lighted when in Power Saving mode
3. Clip 3. Signal Clip
4. Ready
5. MIC LEVEL Level control for Microphone Input
6. LINE LEVEL Level control between Line Input 1 and 2 (mixed)
7. BASS Bass level control
8. TREBLE Treble level control
9. MAIN VOLUME Main volume output control
Item Description
AMP-S040/AP1
1,2. SPEAKER OUT L-CH and R-CH Speaker output
**Never connect L-CH ground (-) and R-CH ground (-) together
3,4. LINE OUT 1 x 3.5mm stereo audio jack unbalanced, 1 x 3.8mm terminal block
5. LINE IN (LINE-2) 2 x RCA LINE-2 input (mixed)
6. LINE IN (LINE-1) 1 x 3.5mm stereo audio jack LINE-1 input (mixed)
7. MIC INPUT (MIC-1) 1 x 6.3mm microphone input jack Mic
8. EXTERNAL VOL CONTROL Connect to 10K VR for External Volume Control
9. RS-232 1 x 3.8mm terminal block
10. DC OUT 12V DC 1A output for powering any media controller devices
11. DC IN To Switching power supply unit 16V DC 5.6A
1.1 BACK PANEL VIEW
Typical Application
Any audio integration that required simple
and a eco power saving digital audio
amplification speaker system
• Schools (Lab, Hall ect.)
• Churches
• Corporate Applications (Function Room)
• Rental