ABtUS CAT-RGB224T/AP3 - Manual (Page 2)

User Operation Guide
* Specifications are subject to changes without notice.
PRODUCT DESCRIPTION
The CAT-RGB224T/AP is a Distribution Amplifier Extender System that allows either 1 of the 2 video
signal/stereo audio to be send to multiple display (*up to 24 displays or 12 displays for CAT-RGB112T/AP3)
over long distances of Cat-5e cable (*300meter point-to-point). It supports resolutions from VGA
(640x480) to WUXGA (1920x1200). Its receiver has a built-in equalization and gain control to adjust
the focus and brightness as well as a enhanced RGB Skew Compensation adjustment. This improves
the VGA signal going thru the CAT- 5e cable with changes to R, G & B signals adjusted individually,
signals are delayed as required for images to be overlaid properly. It also come with a memorized &
lock function features when properly adjusted.
BALANCE/UNBALANCE AUDIO & RJ-45 CONNECTION
PANEL VIEW (RECEIVER)
· Extends VGA signal /stereo Audio over CAT-5e cabling
· Receives computer video and stereo audio up to 1000 feet (305 meters) over CAT-5e UTP,
CAT-5e STP or CAT-6 UTP cable.
· Works well with monitors, projectors, HDTV and flat panels display
· Connects to multiple video screen from either one of the two Input sources
· Supports resolutions from VGA (640x480) to WUXGA (1920x1200)
FRONT PANEL VIEW (TRANSMITTER)
PRODUCT HIGHLIGHTS
Item Description
1. RJ-45 Output port 17 to 24
2. RJ-45 Output port 9 to 16
3. RJ-45 Output port 1 to 8
4. Balance/Unbalance Audio Input port 1
5. Balance/Unbalance Audio Input port 2
Item Description
6. 5xBNC RGBHV Input port 1
7. 5xBNC RGBHV Input port 2
8. RS-232 I/O control port
9. Power Input. Before plugging in the power,
please check if power is AC 100~230V, 50/60Hz
1 2 4 5 6 7 8 9 3
Item Description
1. POWER Push Power to turn ON or OFF system
2. IR Inferred Receiver
Item Description
3. CH-1 Signal Input Select
CH-1 : Signal Input from CH-1
4. CH-2 Signal Input Select
CH-2 : Signal Input from CH-2
1 2 3 4
Item Description
1. EQ Adjustment
2. Gain Adjustment
3. R, G, B (LED, selection Indication)
4. Select Button
Selection of R, G or B for Slew adjustment
5. Color Delay Adjustment “Left”
6. Color Delay Adjustment “Right”
RS-232 PROTOCOL AND CONTROL CODE
1 2 3 4 5 6
1. Communication
Protocol
2. RS-232 Connection 3. RS-232 Control Code
Control code format are of standard ASCII code.
Following are the detail code and description: