Network filters – D-Link DIR-625 User Manual

Page 35

Text mode
Original mode

D-Link DIR-65 User Manual

Section - Configuration

Network Filters

Select Turn MAC Filtering Off, allow MAC
addresses listed below, or deny MAC addresses
listed below from the drop-down menu.

Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual.

Select a DHCP client from the drop-down menu
and click

<< to copy that MAC Address.

Configure MAC

Filtering:

MAC Address:

DHCP Client:

Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.