MIPRO mr515a(2ce228) - Manual (Page 2)

1 2
Thank you for selecting MIPRO h a l f 19-inch unit non-diversity wireless
receiver system. Before operating please read this instruction manual carefully
and thoroughly in order to attain the correct operating procedures and achieve
the best results.
This system is divided into single channel receiver with matching one
microphones and individual volume controls. This system is also equipped
with "PILOTONE" and the latest "NOISE LOCK" dual-squelch circuit, and
provides the efficacy for eliminate the random noise interference when the
receiver is at standby state.
(1) Power Switch & Indicator: When switch is turned on, red indicator
illuminates to denote normal power status.
(2) RF Signal Indicator: Indicates receiving transmitting RF signals.
(3) Audio Signal Indicator: Indicates the microphone signal.
SINGLE CHANNEL WIRELESS RECEIVER SINGLE CHANNEL WIRELESS RECEIVER
① × Audio Output Cable 1
③ × Antenna 1
② × Instruction Manual 1
④ × AC/DC Adapter 1
This system includes the following accessories:
1. PARTS NAME AND FUNCTIONS
A. Front Panel
Fig.1
WIRELESSRECEIVER
MR-515 VHF
SIGNAL
AF RF
(1) (2) (3)
B. Rear Panel
(5) DC 12V Input Jack: To connect 12V DC from the AC/DC adapter.
(6) Unbalanced Audio Output Jack: With 1 / 4 Phone Jack provides audio
output signalfrom this jack t o theamplifier.
(7) Unbalanced Level Switch: "0dB" selection is for "Microphone-level"
output. "+10dB" selection is for "AUX level" output.
-6dB selection
is for half of cable microphone volume.
(8) SquelchAdjusters: Adjust the squelch level to eliminate the RF noise
interference at receiver stand-by state.
(9) Antenna Input Connectors: For rear Antenna Placement.
λ
〝 〞
Fig.2
(8) (7) (6) (5) (4)
+ -
0dB +10dB - 6 d B