DigiTech RP80 - Manual (Page 27)

Drum Machine
The RP80 includes several sampled drum patterns that are useful for developing a good
sense of timing. Press the DRUMS button to enter Drums mode and start playback of the
drum loop (except when in Store or Bypass mode). In Drums mode, the Edit buttons
selects the drum Pattern, Tempo, and Level of the drum loop. Press the Drums button again
to stop playback of the drum loop.
Global Cabinet Modeling
The RP80 includes cabinet modeling that can be enabled on all presets when running it into
a mixer, recording device, or when using it with headphones. This feature emulates a
speaker cabinet connected to each of the amp models in all presets. Each amp model has a
specific cabinet model that optimizes its sound when using the RP80 in this manner. To
enable Cabinet Modeling:
1. Press and hold the DRUMS button when applying power to the RP80. Wait until the
display reads Cabinet On. Release the DRUMS button.
Cabinet Modeling is now enabled for all amp models in all presets. The following lists what
cabinet accompanies each model:
b1-b9 – Blackface – 2x12 Cabinet
o1-o9 – Boutique – Vintage 4x12 Cabinet
r1-r9 – Rectifier – Vintage 4x12 Cabinet
H1-H9 – Hot Rod – British 4x12 Cabinet
t1-t9 – Classic Tweed – 2x12 Cabinet
C1-C9 – British Combo – 2x12 Cabinet
23