DigiTech RP80 - Manual (Page 25)

Other Functions
Expression Pedal
The Expression Pedal on the RP80 can be assigned to control the Volume,Wah,Whammy™,
Ya Ya™, or one of several other parameters in real time with your foot. When a parameter
has been assigned to the Expression Pedal, a programmable minimum and maximum value
can also be assigned. The procedure for assigning a parameter to the Expression Pedal is as
follows:
1. Press the Right EDIT/EFFECT button until the Expression LED in the Effects Row
flashes. An effect LED will also light indicating which effect the expression pedal is
currently assigned to.
2. Press either one of the VALUE/MASTER VOLUME buttons until your desired effect’s
LED is lit in the Effects Row. The Expression LED will continue to flash during your
selection and the Display will show a two-digit mnemonic character value to describe the
effect parameter that the expression pedal is assigned to. Your choices include:
No Assignment --
Volume* OL (Output Level)
Wah AH (Expression Pedal acts as a Wah pedal)
Amp GA (Expression Pedal controls the Amp Gain)
Chorus SP (Speed) LE (Level)
Flanger SP (Speed) LE (Level)
Phaser SP (Speed) LE (Level)
Tremolo SP (Speed) dP (Depth)
* The Volume assignment makes the Expression Pedal behave like a true volume pedal,
meaning any preset linked to volume will have its output level updated automatically
depending on the pedal’s position when the preset is selected.
21