Daewoo DHR-9105P - Manual (Page 46)

RECORDING
45
Recording from an External Input Recording from an External Input
You can record from an external component, such
as a camcorder, VCR or Digital Camera, connected
to any of the HDD/DVD Recorder’s external inputs.
1 Make sure the component you want to record
from is connected properly to the HDD/DVD
Recorder; see pages 15~17.
2 Use [PR+/–] or [INPUT] to select the external input
to record from.
3 Load a recordable disc if you are recording onto
a DVD. And then select HDD or DVD to record.
When you load a new, blank recordable disc
(DVD±RW, DVD±R), the recorder will take a
moment to initialize it for recording.
4 Set the desired Recording mode by pressing [REC
SPEED] repeatedly.
Available disc (or HDD) space will be displayed
by selecting recording mode.
5 Press [REC ( ● )] once.
Recording will start. The REC indicator lights on
the front panel display.
Recording continues until you press [STOP] or
the disc (or HDD) is full.
To record for a fixed length of time, see ‘One
Touch Record‘ on page 40.
6 Press [STOP ( ■ )] to stop recording.
Recording from External Components
You can record from a digital camcorder connected
to the DV IN jack on the front panel of the
HDD/DVD Recorder.
1 Make sure your digital camcorder is connected to
the front panel DV IN jack; see page 17.
2 Press [DV] to select the DV input.
Recording from a Digital Camcorder
• If your source is copy-protected, you will not be
able to record it using the HDD/DVD Recorder.
See ‘Copyright Notice‘ on page 8 for more
details.
DV Input screen appears. Then, if you select
'Yes', it will be changed to DV input.
3 Find the place on the camcorder tape from which
you want to start recording.
For best results, pause playback at the point
you want to start recording.
4 Press [REC] once to start recording.
Recording is automatically paused if the
HDD/DVD Recorder detects no signal. You can
pause or stop the recording by pressing
[PLAY/PAUSE] or [STOP].
You can select media you want to record as
pressing the [DVD] or [HDD].
DV Input
This will stop the Timeshifting
Buffer. Proceed?
Yes
No
Instructions:
Enter-Confirm Setup-Exit Move …†
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘ ` 45 mac001 1200DPI 100LPI