Optoma BTR100 - Manual (Page 8)

Indication of LED
Troubleshooting
Please go through the troubleshooting steps below if there is no sound coming out of
your speakers/devices.
◎ Make sure the BTR-100 is turned on.
◎ Make sure an audio cable or an optical cable is correctly and firmly connected to
your BTR-100 and your audio device/home stereo system.
◎ Make sure that the audio source is correctly selected on your amplifier (analog audio
or TOSLINK)
◎ Make sure the volume is set at a comfortable listening level
◎ Make sure you are within the effective range of reception.
◎ Make sure the Bluetooth is turned on your source device.
◎ Make sure the music is playing from the mobile device.
SAFETY WARNINGS
◎ Keep BTR-100 away from water.
◎ Clean with dry cloth.
◎ Unplug the BTR-100 before cleaning.
◎ Place BTR-100 away from heat sources.
◎ Use only the included accessories.
◎ Unplug the BTR-100 when it is not used..
***aptX ® software is copyrighted by CSR plc or its group companies. All rights reserved.
The aptX ® mark and the aptX logo are trademarks of CSR plc or one of its group
companies and may be registered in one or more jurisdictions.
7
LED Indication Status Description
Flashing LED light Power on ready for pairing Waiting for connection
Steadily Lighted Connected Connection established