Optoma BTR100 - Manual (Page 4)

Analog audio output connection
1.
Connect the 3.5 mm audio input on your audio device to the BTR-100’s 3.5 mm
audio output using the included 3.5 mm to 3.5 mm cable.
2. If your audio device or home stereo system only has RCA inputs—First connect
the two supplied cables together (3.5 mm male into 3.5 mm female), then connect
the RCA audio input on your audio device to the BTR-100’s 3.5 mm audio output
with the combined cable.
Digital/Optical output connection
1.
Connect the TOSLINK optical input of your audio device or home stereo system to
the BTR-100’s TOSLINK optical output using a TOSLINK optical cable (not
supplied).
Turning on the BTR-100
2.
Plug the AC power adaptor into your wall AC outlet, and connect the AC power
adapter’s cable to the BTR-100’s DC input.
3. The LED light will flash once to show the unit is now turned on and ready for
pairing
Pairing your BTR-100
iPad/iPhone/iPod touch
1. Go through the following steps on your iPhone/iPad/iPod:
3
a .From your iPhone/iPad/iPod
homepage, select “Setting”
b. Select “General” c. Select “Bluetooth”