Optoma OCM818B - Manual (Page 9)

*Specifi cations are subject to changes without notice. 9
D.1— Connect the Short Pole to the Ceiling Plate as shown be-
D.2— Insert the M8x55 Socket Cap Screw into the slot on the Ceiling Plate to lock the Flush Mount
Assembly with the M8 Nylock Nut. Tighten the M4x5 Cross Recessed Screws to balance the Flush
Mount Assembly.
(D) Attaching the Flush Mount Assembly to the Ceiling Plate
Tip: When the Projector required servicing, remove the
Projector via the easy disconnection point** to save time.
Ceiling Plate
Short Pole
**M8X55 Socket Cap
Screw and Washer
6mm Allen Key
M8 Nylock Nut
and Washer
Screw
Driver
M4X6 Cross
Recessed
Screw