Optoma EX400 - Manual (Page 52)

52
English
User Controls
• IP Setup: Click “Obtain an IP address automatically” as auto
mode; click “Use the following IP Address” as static mode, IP Ad-
dress/Subnet Mask/Default Gateway/ DNS Server are required to
be filled and then click “Apply” button.
• DHCP Server Setup: Enable/Disable, Start IP, End IP, Subnet
Mask, Default Gateway, DNS server.
• Wireless Setup: This allows you to setup the projector as an
access point or as a client that can be integrated to an existing
network.
Presenter Setup
Admin password/User password is used to change the password
for admin/user in target side.
Click “Connection Control” to enter “Connection Status”