Optoma S310 - Manual (Page 19)

EN-19
Connecting a computer
Connecting a computer
The projector provides two VGA input sockets that allow you to connect them
to both IBM
® compatible and Macintosh ® computers. A Mac adapter is
needed if you are connecting legacy version Macintosh computers.
To connect the projector to a notebook or desktop computer:
1. Take the supplied VGA cable and connect one end to the D-Sub output
socket of the computer.
2. Connect the other end of the VGA cable to the VGA/YPbPr signal input
socket on the projector.
Important
„ Many notebooks do not turn on their external video ports when connected to a
projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external
display on/off. Locate a function key labeled CRT/LCD or a function key with a
monitor symbol on the notebook. Press FN and the labeled function key
simultaneously. Refer to your notebook's documentation to find your notebook's
key combination.