NISSAN 2011 Murano - Manual (Page 30)

Black plate (28,1)
Model "Z51-D" EDITED: 2010/ 7/ 23
SSS0995
Removal
Use the following procedure to remove the
adjustable headrests.
1. Pull the headrest up to the highest position.
2. Push and hold the lock knob.
3. Remove the headrest from the seat.
4. Store the headrest properly in a secure
place so it is not loose in the vehicle.
5. Install and properly adjust the headrest
before an occupant uses the seating posi-
tion.
SSS0996
Install
1. Align the headrest stalks with the holes in
the seat. Make sure that the headrest is
facing the correct direction. The stalk with
the adjustment notches
*
1 must be in-
stalled in the hole with the lock knob
*
2 .
2. Push and hold the lock knob and push the
headrest down.
3. Properly adjust the headrest before an
occupant uses the seating position.
SSS0229A
ARMREST
Rear armrest
Pull the armrest forward until it is horizontal.
1-14 Safety — Seats, seat belts and supplemental restraint system